Changing tent.

[soupdragon]

This is an eTone cube, by all accounts it should be ok with 8x10.
I have not received it yet as I suspect it's coming from China
It's a bit late now but anybody had any experience with these things?

 

[Dave_P]

I used a very similar Calumet one for 5x4" for years. Slight design difference but the same size.

This isn't the news you want to hear but it's not big enough for 10x8" except in an emergency - speaking from experience here. The base is only 50cm wide according to the spec, and to slide a sheet of 10x8" film into a holder you need wider than that. Same goes for pulling out or inserting the darkside. There's only enough room to do these actions if holding everything at 45 degrees, which is a pain in the arse.

 

[soupdragon]

Sorry.
This is the one I ordered.
27.6 all round I'm hoping will be enough.

 

[Dave_P]

Yeah if it's 70cm rather than 50cm you should be just about alright.

 

[HowLarge]

I have one it works , takes practice to fold so pay attention at 1st unfold and immediately re fold a couple of times, I sometimes use a small shelf inside to help organise/stack
If I had more space I might invest in a Fuji dark box - these are more durable long term , some expensive tents are reputed to fall apart long term due to the materials used.

 

[David M]

I have the Calumet one, which is not quite the same. You can do 10x8, but it needs a good deal of care and concentration to keep track of where you are.