- Joined
- Aug 6, 2016
- Messages
- 665
Not been doing much 4x5 work of late, concentrating on some 6x6 pinhole work lately, you can view them here http://martinimages.photium.com/portfolio435704.html
This image was taken looking down stream of the River Wharfe in Otley West Yorkshire.
Primarily used to test my new Calter 11-N 90mm f/6.8 that replaced my rather large 90 Grandagon 90 f/4.5.
I thought it would be a much darker experience under the cloth than the f/4.5 but had no problems viewing or focusing and the results looked equally as good as the Grandagon, so well pleased.
For this I wanted the water to have a silky blur so I used a 6 stop ND filter.
Used a small amount of front axis tilt.
Chamonix 045n-2
Calter 11-N 90mm f/6.8
Fuji Acros rated at 80iso
Developed in Replenished Xtol stock 7 mins 20c
I reduced the total dev time by 10% to control the highlights
Exposure with front tilt 64 seconds @ f/32
Scanned with Epson v800 using Vuescan
This image was taken looking down stream of the River Wharfe in Otley West Yorkshire.
Primarily used to test my new Calter 11-N 90mm f/6.8 that replaced my rather large 90 Grandagon 90 f/4.5.
I thought it would be a much darker experience under the cloth than the f/4.5 but had no problems viewing or focusing and the results looked equally as good as the Grandagon, so well pleased.
For this I wanted the water to have a silky blur so I used a 6 stop ND filter.
Used a small amount of front axis tilt.
Chamonix 045n-2
Calter 11-N 90mm f/6.8
Fuji Acros rated at 80iso
Developed in Replenished Xtol stock 7 mins 20c
I reduced the total dev time by 10% to control the highlights
Exposure with front tilt 64 seconds @ f/32
Scanned with Epson v800 using Vuescan
Last edited:
